Texturized Roving

Texturized Roving Technical Data Sheet

If you require more information including MSDS, or additional products and services, please contact our office directly
» click here

N1-A roving is made with one or more strands of continuous filament glass fiber yarns of single-end rovings after processing them through an air jet. The high-pressure air jet volumizes, curls and coils the strands to make them bulkier with wider coverage. N1-A texurized rovings are mainly used for reinforced poultruded profiles.

N1-A texturized roving has a sizing system with a silane coupling agent.. It is compatible with unsaturated polyester and vinylester resins.

N1-A roving is especially designed for applications requiring additional reinforcement in the transversal direction: pultrusion of profiles, weaving for shipbuilding, etc.


Pallet dimensions
Pallet height, cm (in) 94 (37), Pallet length, cm (in) 112 (44), Pallet width, cm (in) 112 (44), , Number of layers: 3, , 48-roll pallet weight, kg (lb) 336 (741), 64-roll pallet weight, kg (lb) 448 (988)

Doff dimensions
Doff height, cm (in) 26 (10), Doff weight, kg (lb) 7 (15.4), Doff diameter, cm (in) 26 (10), Doffs/layer 16, Doffs/pallet 48 or 64

Doffs are wrapped in plastic bags, then packed in individual cardboard boxes or bulk packed.


Unless otherwise specified, it is recommended to store glass fiber products in a cool, dry area. Temperature should not exceed 35°C (95°F) and the relative humidity should be kept below 75%. Glass roving products must remain in packaging material until just prior to their use. If these conditions are respected, the glass fiber product should not undergo significant changes when stored for extended periods of time.


To ensure safety and avoid damage to the product, skids should not be stacked more than two high.