Thermoplastic PP Applications

Thermoplastic PP Applications Technical Data Sheet

If you require more information including MSDS, or additional products and services, please contact our office directly
» click here

C6-A is E-glass chopped strand used for reinforcement of PP with good resin compatibility These chopped strands are engineered in different diameters to better meet customer requirements. They are designed to improve dimensional stability at high temperatures, to better control the shrinkage of the molded part, and to improve tensile and flexural modulus and impact.

C6-A Strands are manufactured from a collection of continuous glass filaments gathered into a single bundle. Higher performance chemistry is applied to optimize glass / matrix adhesion and provide excellent bundle integrity.The fiber bundles are then chopped into specific lengths, dried, screened, trace metals removed and packaged in reusable bags to meet your end-use requirements.

The product is optimized to meet your cost and performance needs.


Super Sack: 1000kg (2204lbs), 1 Super Sack per 110cm×110cm pallet. Individual bag: 22.7kg (50lbs), 40 bags packaged on a pallet.


Unless otherwise specified, it is recommended to store glass fiber products in a cool, dry area. Temperature should not exceed 35°C (95°F) and the relative humidity should be kept below 75%. Fiberglass products must remain in packaging material until just prior to its use. If these conditions are respected, the glass fiber product should not undergo significant changes when stored for extended periods of time.


To ensure safety and avoid damage to the product, super sack skids should not be stacked. Individual bags skids should not be stacked more than two high.