Woven Roving


Woven Roving E-Glass Technical Data Sheet

If you require more information including MSDS, or additional products and services, please contact our office directly
» click here

W1-A E-glass Woven Rovings are composed of direct rovings woven into a fabric. The input rovings are designed to give rapid wet-out and excellent laminate properties. The construction gives bi-directional (0°/90°) reinforcement and the strength of continuous filaments. The type of construction confers to the fabric an excellent dimensional stability during handling. W1-A is ideal for hand and machine production of boats, containers, aircraft and automotive parts, home furnishings, sports equipment, corrosion-resistant tanks, translucent panels, and other parts with large areas.

All W1-A Woven rovings are manufactured to meet ISO 9001 standards. These products have obtained the quality certification of Norway Boat code. W1-A is designed to be compatible with most resins and is widely used in a multitude of applications.

Packaging

W1-A Woven Roving is wound into a roll on a cardboard inner tube with an inside diameter of 8cm (3.1"). All densities are 23cm (9") in diameter. Each roll is wrapped with a plastic bag and placed in a cardboard box. 12 or 16 boxes are placed horizontally on a pallet, which is stretch wrapped.

Storage

Unless otherwise specified, it is recommended to store glass fiber products in a cool, dry area. Temperature should not exceed 35°C (95°F) and the relative humidity should be kept below 75%. Glass roving products must remain in packaging material until just prior to their use. If these conditions are respected, the glass fiber product should not undergo significant changes when stored for extended periods of time.

Stacking

To ensure safety and avoid damage to the product, skids should not be stacked more than two high.